Conductor Resistance Temperature Coefficient
The resistance of copper and aluminium conductors increases with temperature (roughly 0.4%/°C for copper); NEN-EN 60228 specifies conductor resistance at a reference temperature of 20°C. A resistance measured during an R1+R2 continuity test at a higher ambient or operating temperature must therefore be corrected back to the 20°C reference value before comparing it with the calculated/expected design value, otherwise a conductor may appear to deviate when it does not.
Bij een R1+R2-meting in een warme technische ruimte (35°C) rekent de inspecteur de gemeten waarde met de temperatuurcoëfficiënt terug naar 20°C, voordat hij deze toetst aan de in het ontwerp berekende maximale kringweerstand.
Een R1+R2-meetwaarde die bij een afwijkende omgevingstemperatuur is gemeten rechtstreeks vergelijken met de 20°C-ontwerpwaarde zonder temperatuurcorrectie, waardoor een op zich goede kabel ten onrechte wordt afgekeurd (of, andersom, een te hoge weerstand ten onrechte wordt goedgekeurd) bij lage omgevingstemperatuur.
See also
- → DIN 46228 / IEC 60947-7-1 Wire ferrules — crimping flexible conductors for terminal connections
- → IEC 60502-1 / NEN 1010 §543.4 Concentric (PEN) cables — the wave-formed concentric conductor as combined neutral-and-earth, and why it is not a shield
- → DLRO / IEC 62271 Contact resistance testing with a micro-ohmmeter (DLRO) — verifying joints that thermography can miss
- → §521.5 (IEC 60364-5-52) Single-core cables through a steel gland plate — why all conductors of one circuit must share the same opening
- → IEC 60228 Conductor classes IEC 60228 — class 1 through 6, and why the flexibility class determines the termination method
- → IEC 60502-2 (halfgeleidende laag) Semiconducting layer in MV cables — conductor screen and insulation screen per IEC 60502-2