Plate Earth Electrode
An earth electrode consisting of a metal plate (copper or galvanised steel) installed vertically or horizontally in the ground, used as an alternative to a rod electrode or foundation earth electrode where soil conditions require it or no foundation is available to embed a ring electrode. The earth resistance of a plate electrode depends heavily on the soil resistivity and the plate's effective surface area; in high-resistivity soil, multiple plates in parallel or a longer rod electrode are often needed to achieve the required earth resistance.
Bij een vrijstaande schuur zonder gewapende fundering plaatst de installateur een verzinkte plaatelektrode van 0,5 x 1 m op 0,8 m diepte in vochtige grond, omdat een funderingsaarder hier niet mogelijk is.
Een plaatelektrode plat vlak onder het maaiveld plaatsen — bij uitdroging van de bovenste grondlaag in de zomer stijgt de aardweerstand dan sterk; de plaat moet dieper worden geplaatst waar de grond het hele jaar vochtig blijft.
See also
- → §542 / IEC 60364-5-54 Sizing an earth electrode — the calculation formulas for rod and plate electrodes
- → §542 Earth Electrodes — Foundation Earth Electrode, Rod and Ring Electrodes (§542)
- → §411 Protective earthing (PE)
- → §413.3 Electrical separation (§413.3) — an isolating transformer as a protective measure without earthing
- → §531 Residual Current Circuit Breakers (RCD)
- → §542 (elektrodemateriaal) Galvanic corrosion of earth electrodes — material choice copper versus steel