Insulation Temperature Class (PVC/XLPE)
The maximum permitted operating temperature of the conductor insulation, which determines a cable's current-carrying capacity: PVC-insulated cables (e.g. YMvK, VOB) are rated for a maximum continuous operating temperature of 70°C, while XLPE-insulated cables (cross-linked polyethylene, used in many modern installation and underground cables) can withstand up to 90°C. This 20°C temperature difference gives XLPE cables a considerably higher current-carrying capacity than PVC at the same cross-section, which is why XLPE is often preferred for heavier loads; the short-circuit temperature (for brief periods) is even higher for both types (160°C for PVC, 250°C for XLPE).
Bij het herberekenen van de belastbaarheid van een bestaande YMvK-kabel (PVC, 70°C) die wordt vervangen door een XLPE-kabel van dezelfde doorsnede, kan de installateur een hogere stroombelastbaarheid aanhouden volgens de belastbaarheidstabellen van NEN 1010.
Bij het combineren van een nieuwe XLPE-kabel met oude PVC-eindafwerkingen of -moffen de belastbaarheid van de XLPE-kabel (90°C) aanhouden, terwijl de zwakste schakel — vaak de oudere PVC-component — de daadwerkelijke maximale bedrijfstemperatuur van het geheel bepaalt.
See also
- → IEC 60502-1 / NEN-EN 50525 Cable insulation material: PVC versus XLPE/EPR — operating temperature, short-circuit temperature and the effect on ampacity
- → IEC 60502-2 (halfgeleidende laag) Semiconducting layer in MV cables — conductor screen and insulation screen per IEC 60502-2
- → IEC 62262 IK classification — mechanical protection of enclosures (IEC 62262)
- → IP IP Ratings (IEC 60529)
- → IEC 61442 Cable joints — underground cable connections and repairs (IEC 61442)
- → IEC 60364-5-52 Tab. B.52.21 Cables in thermal insulation — current-carrying capacity per table B.52.21